The Seakeeper 26 is designed to achieve up to 70 to 90% roll reduction on vessels up to 100 tons, vessels 80-100'.
Multiple units can be fitted for larger vessels.
The Seakeeper 26 requires only modest electrical power, has no outside appendages, and can be installed off centerline, if necessary.
Its computerized control and vacuum technology make it the first truly practical, and only modern,
Scroll down for TECH SPECS...
Angular Momentum at Rated RPM
Anti-Rolling Torque at Rated RPM
Spool-up Time to Rated RPM
90 minutes (5,000 RPM)
Spool-up Time to Stabilization
70 minutes (4,250 RPM)
3000 Watts Max
AC Motor (sea state dependent):
AC Input Voltage:
DC Input Voltage:
208-230 VAC (+/- 10%), 50/60 Hz, Single Phase
24 VDC @ 10 Amps
Sea Water Supply to Heat Exchanger
30 LPM (8 GPM) maximum
15 LPM (4 GPM) minimum
Ambient Air Temperature
0° - 60° C (32° - 140° F)
1342 kg (2960 lbs) bolt-in installation
Length x Width x Height
1.34 L x 1.42 W x 1.03 H (meters)
52.7 L x 55.9 W x 40.4 H (inches)
At full operating RPM, steady state noise measured in the factory at a 1 meter distance measures 72-74 dBC. (Sound levels may be higher during spool-up)
USA Yacht Stabilizers Copyright © 2015