Seakeeper 30 HD

Seakeeper 30 HD

216,300.00

COMMERCIAL GRADE STABILIZATION

The Seakeeper 30HD is built to eliminate up to 95% of boat roll on vessels up to ~85 tons. Larger vessels can be fitted with multiple units to achieve optimal results. Unlike traditional external fins, the Seakeeper 30HD requires only modest electrical power and has no external appendages—meaning no drag or risk of snags.

Innovative Cooling System

Our patented cooling system allows the flywheel to spin at an extremely high rate of speed, providing ultimate performance in the smallest and lightest package possible.

Vacuum Sealed

Seakeeper’s vacuum encapsulation enables the flywheel to spin roughly three times faster, cuts flywheel weight by two-thirds and halves power requirements. Moreover, because the critical components (flywheel, bearings, and motor) are sealed for life in a vacuum, they are forever isolated from the marine environment.

Active Control

Seakeeper’s active control optimizes gyro torque, providing an unsurpassed level of performance. Unlike a passively controlled gyro, which must be turned off in the roughest conditions and/or at higher speeds, the Seakeeper is effective at all speeds and can be used in all sea conditions.

Specifications

Rated Speed4,400 RPM

Angular Momentum at Rated RPM30,000 N-M-S

Anti-Rolling Torque at Rated RPM62,571 N-M

Spool-up Time to Rated RPM75 minutes (4,400 RPM)

Spool-up Time to Stabilization50 minutes (3,500 RPM)

Spool-up Power

AC Motor3000 Watts Max

DC Control240 Watts

Operating Power

AC Motor (sea state dependent)2000 - 3000 Watts

DC Control240 Watts

AC Input Voltage208 - 230 VAC (+/- 10%), 50/60 Hz, Single Phase

DC Input Voltage24 VDC @ 10 Amps

Weight 3,920 lbs (1,778 kg)

Envelope Dimensions54.3 L x 55.9 W x 43.5 H (inches)
1.38 L x 1.42 W x 1.11 H (meters)

Noise Output72-74 dBC at 1 meter

*PRICE DOES NOT INCLUDE INSTALLATION. SEAKEEPER 30HD SOLD WITH INSTALLATION. NOT AVAILABLE AS INDEPENDENT PURCHASE. PLEASE CONTACT US TO DISCUSS YOUR VESSEL AND NEEDS

Add To Cart